日本OMRON數字光纖放大器功能描述 

上海乾拓貿易有限公司

聯系人：楊江玲

企業QQ：2880626083

手 機：18917074297（微信）

電 話：021-39529830-8012

郵箱；18917074297@163.com

地址：上海市嘉定區江橋嘉涌路6號樓713室

Switching between normal/reverse possible Optical axis adjustment Optical axis adjustment

 possible (hyper-flashing function) Ambient illumination (receiver side) 

Incandescent lamp: 10,000 lx max. Sunlight: 20,000 lx max.

0.5 ms for operation and reset respectively

1 ms for operation and reset respectively

Super-longdistance mode

Sensitivity setting Teaching or manual method

OFF-delay timer: 0 to 200 ms, 1 to 20 ms (set in 1-ms units); 20 to 200 ms 

(set in 5-ms units) Using Mobile Console: OFF delay, ON delay, or one shot (selectable)

Automatic power control (APC)

 Eco Mode: 720 mW max. (current consumption: 30 mA max. at power supply voltage of 24 VDC) 

Digital display not lit: 600 mW max. (current consumption: 25 mA max. at power supply voltage of 24 VDC)

Load current: 50 mA (residual voltage (NPN/PNP): 1 V max., Open collector (NPN or PNP output,

 depending on the model) Light ON/Dark ON selectable

Protection circuit

Power supply reverse polarity, Output short-circuit protection, 

Mutual interference prevention (supported for up to 10 Units)

 double bar indicators (green and red), 7-segment digital threshold display (red) 

Fiber-optic current digital control

7 ms for operation and reset respectively

Operation indicator (orange), 7-segment digital incident level display (red), 

7-segment digital incident level percentage display (red), threshold and excess gain 2-color

Power supply voltage 12 to 24 VDC±10%, ripple (p-p) 10% max.

Power consumption

Normally: 960 mW max. (current consumption: 40 mA max. at power supply voltage of 24 VDC)

0.25 ms for operation and reset respectively

--- Fiber-optic current digital control

Zero-reset Negative values can be displayed. Initial reset Settings can be returned to defaults as required.

Upper and lower limits can be set as required for every 100 digital values.

2 ms for operation and reset 

Display timing Switching between normal/peak-hold/bottom-hold possible Display orientation 

4 ms for operation and reset respectively

日本OMRON數字光纖放大器功能描述